Cheapest Factory Gasket Material Non Asbestos - FBYS411 Non asbestos sealing sheet – Ishikawa
Cheapest Factory Gasket Material Non Asbestos - FBYS411 Non asbestos sealing sheet – Ishikawa Detail:
Features
Excellent temperature resistance
Good processing and adaptability
Can be used as an alternative to flexible graphite plates
Can be made into a sprint composite board
Asbestos-free confirmation and ROHS certification by a third party
Product use
Recommended for automotive, general purpose exhaust end sealing liner materials
Rules
Sheets: length ≤1150mm,width ≤1150mm, thickness 0.5 to 2.0mm
Special specifications can be agreed with the customer
Physical performance
|
Test conditions |
Pilot project |
Standard |
|
100°C×1h 。 |
The horizontal stretch strength Mpa≥ |
2.0。 |
|
100°C×1h 。 |
Dense g/cm3 |
1.0±0.1 。 |
|
100°C×1h 。 |
The rate of contraction % |
40±7 。 |
| Rebound rate % % |
6。 |
|
|
550°C×1h 。 |
Burn loss % % |
35。 |
|
100°C×22h 。 |
Creep relaxation rate % %≤ |
30。 |
|
Distilled water. |
The thickness change rate %≤ |
15。 |
| Weight change rate %≤ |
45。 |
|
|
Water : glycol is 1:1 100°C×5h 。 |
The thickness change rate %≤ |
15。 |
| Weight change rate %≤ |
60。 |
|
|
ASTM FUEL B。 |
The thickness change rate %≤ |
10。 |
| Weight change rate %≤ |
45。 |
|
|
IRM 903 s standard oil |
The thickness change rate %≤ |
15。 |
| Weight change rate %≤ |
50。 |
|
|
Heat-resistant aging |
The rate of contraction % |
30±7 。 |
| Rebound rate % % |
30。 |
|
| The thickness change rate %≤ |
0±5 。 |
|
| Weight change rate %≤ |
0±3 。 |
Product detail pictures:
Related Product Guide:
Fast and very good quotations, informed advisers to help you choose the correct merchandise that suits all your preferences, a short creation time, responsible excellent command and different companies for paying and shipping affairs for Cheapest Factory Gasket Material Non Asbestos - FBYS411 Non asbestos sealing sheet – Ishikawa, The product will supply to all over the world, such as: Zurich, Colombia, Qatar, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
By Isabel from Amsterdam - 2018.02.08 16:45
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Elsie from Costa Rica - 2018.12.25 12:43
